Drivers
At a charger now?
Three ways to get unstuck, fastest first.
1 · Text or chat EVre
+1-844-985-3873 text only · call EVre at (816) 313-2578
chat.ev-re.org web chat
Text us and our support assistant answers right away — it knows every EVre charger and can walk you through starting a session, decode charger status lights, and tell you exactly who to call if hardware is at fault. We own these stations and monitor them around the clock.
2 · Call the network
Noodoe — Tritium chargers at Ayerco (Canton,
Bowling Green, Kirksville)
and Dierbergs (Osage Beach):
+1-909-323-3119 · 24/7
Blink — Olympic Oaks Village (Des Peres):
+1-888-998-2546 · 24/7
Have the station information from the charger ready when you call network support — it speeds everything up.
- Noodoe chargers: the Station ID is on the QR sticker on the front face above each port holster — look for the 9-digit number below the scannable code.
- Blink chargers: the serial number is shown at the bottom left of the LCD screen, or on the stainless steel nameplate on the right side of the charger near the base.
3 · Session basics
- Plug the connector into your vehicle first.
- Follow the on-screen prompts, or scan the QR code on the charger to open the network app.
- Pay by card, app, or Plug & Charge where supported.
Every EVre public station is a DC fast charger carrying both CCS1 and NACS (Tesla) connectors — no adapter needed. Our stations run 60–75kW and typically take a vehicle from 20% to 80% in about 30–45 minutes.